Avoid These Three Things To Car Not Down Machine

Expensive overhaul costs, many motorists avoid it.

Down engine overhaul alias is the actual way to avoid the owner of the vehicle. Down machine is the process of inspection and maintenance of the engine as a whole. Dismantled car engine to be checked and carefully measured components contained therein.

If found faulty component or less functioning properly, then the replacement with new components, then all the components are assembled back.

Talk costs, relatively expensive. Therefore, it includes the cost of replacement parts as well as quite a lot of additional service fees. Thus, down the machine is avoided owner of the vehicle.

So you do not become a victim down the engine, as the owners and motorists must recognize the symptoms of abnormal machine so as not to suddenly broken.

AstraWorld mention, there are three essential conditions that must be considered and it is anticipated that the engine is not to run into down the machine. Anything? Here's his review:

1. Machine sudden death due to overheating

When the engine suddenly died when the middle to drive, you should not directly start the engine (starter) back. Advance notice pointer engine temperature. When showing H (hot), you should not start the engine, but do check that leakage of water cooling system radiator and radiator cooling fan.

If the results of checks did not find the cause, do not force it on again because the car engine overheating can happen again. Better to ask for help technicians to perform repairs or ask for help tow the car to a repair shop if the car can not be repaired at the scene.

2. Engine stays on even though there is no lubrication

When the machine is not lubricated oil, oil indicator on the dashboard lights up. If this happens, immediately turn off the car engine, then do check the capacity of the oil through a wand (stick) oil. Add engine oil if low or empty.

Check also the possibility of oil leaks. If there is a leak, fix it immediately and do not start the engine without repairing the leak in advance. In addition to checking the quantity, oil circulation also need to be checked to ascertain whether the decent car engine is turned on.

Do menghidupan machine if there is no circulation due to the possibility of the oil pump does not work or no oil channels are clogged.

3. The machine take in water (water hammer)

The entry of water into the engine may occur from the suction channel that takes outside air into the engine. This condition generally occurs when the car through the roads were flooded with water levels reaching a height of hole suction channels.

Due to the high suction power in the suction channel, the water will easily go sucked into the engine. Water entering into the engine helped push the piston so that it can lead to rupture of the piston, connecting rod broken, bent valves and engine misfire total.

To prevent this, do not turn on the ignition and forcing through a puddle when the water level around the car has exceeded wheel.